2.54High Push DIP - DSIC09PLHGET

DSIC09LHGET

Brand: Taiwan Jleadtek-KE series

Product features: 2.54mm pitch (0.1 inch pitch); direct-insertion (DIP)/surface-mount (SMT) dial switch; standard gold-plated contacts; attached with high-temperature resistant film; high-temperature resistant plastic body design.
Product Type: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12 digits

1. Rated current: switching current 25mA, 24VDC, non-switching current 100mA, 24VDC.

2. Contact impedance: initial value 50 milliohms, 100 milliohms after testing.

3.Insulation impedance: 100MΩ Min at 500VDC.

4. Withstand voltage: When AC 500V (50~60Hz) voltage is input between the pins, the induced current is 2m (A) for one minute.

5. Operating force: Maximum 1000gf.

6. Life test: 3000 cycles.

1. Cover and body: Engineering plastic, high temperature material with UL94V-0 fireproof grade, (PPS), black.

2. Push button: Engineering plastic, high temperature material that meets UL94V-0 fireproof grade, (PA46), white.

3. Fixed contacts and movable contacts: copper alloy gold-plated; Lead pins: copper alloy gold-plated.

4. Adhesive film: high temperature resistant film

1. Hand soldering: no more than three seconds at a temperature above 350 degrees Celsius or no more than five seconds at a temperature below 270 degrees Celsius.

2. Reflow soldering: 260 degrees Celsius ± 5 degrees within 10 seconds. Please set the push button to the "OFF" position during soldering and cleaning.

IC tube or reel