2.54High Push DIP - DSIC02PLHGET

1. Rated current: Switching current 25mA, 24VDC, non-switching current 100mA, 50VDC

2. Contact impedance: Initial value 50 milliohms, after testing 100 milliohms

3. Insulation impedance: minimum 500 megohm at 500VDC

4. Withstand voltage: 500VDC/one minute

5. Operation force: Maximum force 1000gf

6. Life test: 3000

1. Cover and body: Engineering plastic UL94V-0 grade high temperature material, black

2. Push button: Engineering plastic UL94V-0 high temperature material, white

3. Fixed contacts and movable contacts: gold-plated copper sheets;

4. Pins: Copper sheet gold plated

5. Adhesive film: high temperature resistant film

1. Hand soldering: no more than three seconds at a temperature above 350 degrees Celsius or no more than five seconds at a temperature below 270 degrees Celsius.

2. Reflow soldering: 260 degrees Celsius ± 5 degrees within 10 seconds. Please set the push button to the "OFF" position during soldering and cleaning.

All switch knobs are set to the "OFF" position during packaging; IC tube packaging