2.54High Push SMT - DSIC06LSGET

DSIC06LSGET

 Product name: 2.54mm pitch DSIC05LSGET DIP switch 

Stock information: Taiwan Jleadtek-KE series 

Product types: 2, 3, 4, 5, 6, 7, 8, 9, 10, 12 digits, 11 types in total 

Product features: 2.54mm pitch; standard gold-plated contacts; attached with high-temperature resistant film; high-temperature resistant plastic body design

1. Rated current: Switching current 25mA, 24VDC, non-switching current 100mA, 50VDC

2. Contact impedance: Initial value 50 milliohms, after testing 100 milliohms

3. Insulation impedance: minimum 500 megohm at 500VDC

4. Withstand voltage: 500VDC/one minute

5. Operation force: Maximum force 1000gf

Life test: 2000

1. Cover and body: Engineering plastic UL94V-0 grade high temperature material, black

2. Push button: Engineering plastic UL94V-0 high temperature material, white

3. Fixed contacts and movable contacts: gold-plated copper sheets;

4. Leads: copper sheet gold-plated;

5. Adhesive film: high temperature resistant film

1. Hand soldering: no more than three seconds at a temperature above 350 degrees Celsius or no more than five seconds at a temperature below 270 degrees Celsius.

2. Reflow soldering: 260 degrees Celsius ± 5 degrees within 10 seconds. Please set the push button to the "OFF" position during soldering and cleaning.

2.回流焊：攝氏265度至攝氏275度10秒以內，請於焊接和清洗時將推鈕設在“OFF”的位置

All switch knobs are set to the "OFF" position during packaging; IC tube packaging